Hot Tubs Engineered for the World’s Harshest Climates

SUMMIT XL – Custom Series

TECHNICAL SPECIFICATIONS

Equipment Location

arcticspas Equipment Location Summit XL

Details

Outside Dimensions:

117’’ x 93’’ | 297 x 235 cm | 10′ x 8′

Height:

39’’ | 98 cm | 3′

Dry Weight:

1057 Lbs | 479 Kg

Wet Weight:

5539 Lbs | 2512 Kg

Ground Pressure – FULL (lbs/ft2):

79.0

Water Capacity:

537 Gallons | 1995 Liters

Heater(Watts):

NA / Euro | 5500 / 2×3600

Electrical Requirements North America
(A = actual / B = breaker):

240 Volts / 6 Gauge Wire
1 Pump / A32amp / B40amp
2 Pumps / A40amp / B50amp
3 Pumps / A40amp / B50amp
4 Pumps / A48amp / B60amp
115 Volts / 14 Gauge Wire
1 Pump / A12amp / B15amp

Dimensioned Drawings

How to Build Deck Access For a Hot Tub

Recommended Site Access and Preparation

CUSTOM SERIES WITH FOREVER FLOOR®

Most Spas Require 44” Clearance to get through gates, between houses and side fences and around corners. 9’-10’ of overhead clearance in order to move the spa into place.

To select a location for your new Arctic Spa with Forever Floor® will require a flat compact surface.

If you are using 4X4 railroad ties, they should be a maximum of 12-inch centers to properly support the entire underside of your spa.
Balconies and decks should be constructed to meet all builder codes and should be able to support up to exceed 100lbs/square foot. Remember that a gallon of water weighs roughly about 10 lbs

Your Spa can weigh as much a 1000lbs (454kg)